How do I know which toilet seat …

How do I know which toilet seat to replace?

0:05
1:00
One is called round. And the other is slightly. Longer it's called elongated. Every seat has oneMore

How to fix a weak flushing toilet?

The easiest fix for a toilet that doesn't flush, is to check the flapper chain. Chain length and obstructions are often the most common reasons for a slow-flushing toilet. If the flapper chain length is too loose, the flapper will not lift off the flush valve opening, causing a weak flush.AmericanStandard座廁好唔好

What are the disadvantages of a dual flush toilet?

Disadvantages of installing a dual flush toilet
More expensive to buy than a single flush toilet.
Flushing doesn't always get rid of the majority of the waste due to the bowl containing less water than a single flush version.
Using the full flush button may still leak to the occasional bit of streaking in the bowl.

Which is better, Kohler or American Standard?

If you're looking for a top-notch flushing system and affordable prices, American Standard may offer some excellent products. However, if comfort, design, and usability are more important, opt for Kohler models.

Which toilet is better, TOTO or American Standard?

Toto uses similar materials to build its toilets, but the designs are often more complex than American Standard. They also feature high-performance flushing technology that gives Toto toilets an advantage in flushing power over many of its competitors.

How do I buy the correct toilet seat?

Measuring up for a new toilet seat really is simple. You will need to take 4 measurements from your toilet: Length, width, height and distance between fixing holes. For length, place one end of your tape measure between the fixing holes and stretch out to the very front end of your toilet.

Which toilet flush system is the best?

Created by the toilet company Toto, the double cyclone flush system has two nozzles (instead of using Rim holes), backed with a propulsion system that gets more water to pass through the tube. It creates a forceful siphon that prevents clogging with less water needed for each flush.

What is the difference between standard and American Standard toilets?

The traditional toilet bowl rim height is about 15-inches from the floor. The seat ring adds another ½ to 1-inch of height. Many people find a taller toilet bowl is more comfortable. American Standard offers Right Height toilets with a rim height of 16-1/2 inches from the floor.American Standard 馬桶

How to get rid of air bubbles in a toilet?

Just open the filler valve at the back of your toilet and wait for about five minutes while it drains out some of its own water, then try refilling it again. This should get rid of any excess gas rattling around in there. If these steps didn't do the trick, call a licensed plumber to inspect your toilet.AmericanStandard馬桶評價

Is American Standard toilets made in China?

While China plays a part in manufacturing American Standard toilets, Mexico actually boasts the majority of toilet production. As a result, American Standard toilets are mainly manufactured or assembled in production facilities in Mexico after having sourced components from China and other Asian countries.